Lindy USB-C SSD Clone Station – M.2 NVMe & SATA Drive Support (USB 3.2)

Lindy USB-C SSD Clone Station – M.2 NVMe & SATA Drive Support

Lindy USB-C 3.2 to M.2 NVMe & SATA SSD Clone Station combines fast USB 3.2 Gen 2 docking with an independent offline clone function to simplify backups, migrations and data recovery.

Designed for system installers, IT technicians and integrators, the unit provides simultaneous host access to an M.2 NVMe and a 2.5"/3.5" SATA drive while also performing bit‑for‑bit offline clones (source to target and vice versa) without a computer connection. Its support for NVMe and SATA media makes it ideal for OS/partition migration, rapid capacity upgrades and secure disk cloning workflows.

Features and Benefits

• Supports simultaneous read/write access to an M.2 NVMe SSD and a SATA SSD/HDD for fast data transfers and diagnostics.
• Offline (standalone) cloning between M.2 NVMe and 2.5"/3.5" SATA drives—creates bit‑for‑bit copies including OS and partitions.
• USB 3.2 Gen 2 SuperSpeed interface for data rates up to 10 Gbps when paired with compatible hosts and cables.
• Supports PCIe Gen3x2 NVMe (up to 15.75 Gbps) and SATA III (6 Gbps) devices for broad drive compatibility.
• UASP, TRIM and hot‑swap support for improved SSD performance and convenience during maintenance.
• LED indicators and a clone-direction switch provide clear cloning status and simple operation.
• Ideal for technicians and IT teams for backups, migrations, drive imaging and data recovery tasks.

What's in the box

• USB-C to M.2 NVMe & SATA SSD Docking & Clone Station
• 12V DC 2A multi-country power supply
• USB 3.2 Gen 2 Type‑C to Type‑C/A cable (26 cm)
• Aluminium sheet and thermal conductive silicone pad
• M.2 rubber cartridge
• Lindy user manual

Product Q&A

• Q: Can I clone from an M.2 NVMe to a 3.5" HDD?
  A: Yes. The unit supports offline cloning in both directions between M.2 NVMe and 2.5"/3.5" SATA drives.
• Q: Do I need a computer to perform a clone?
  A: No. The dock supports offline (standalone) cloning via its Clone button and direction switch without a host computer.
• Q: What transfer speeds can I expect?
  A: When connected to a USB 3.2 Gen 2 host and using compatible NVMe/SATA drives, the interface supports up to 10 Gbps. NVMe performance may use PCIe Gen3x2 bandwidth (up to 15.75 Gbps effective link to the drive).
• Q: Which M.2 sizes and keys are supported?
  A: The dock supports M.2 42mm, 60mm and 80mm cards with M-key and M+B key.
• Q: Is TRIM and UASP supported?
  A: Yes. The device supports UASP and TRIM to help maintain SSD performance when used as a docked drive.