OWC Internal SSD add on DIY Kit with Installation Tools (for iMac 21.5-inch 2011)

iMac SSD Kit – add SSD to the Bay Below DVD Drive

Before attempting to perform this installation, please watch the following instructional video in its entirety to determine your ability to perform this complex procedure. OWC assumes no responsibility for damage that may occur during the install. Technical support for this DIY product consists only of the installation video.

Note: This tool kit is not to change a primary hard drive on your iMac. It is to add an SSD into the HDD bay below the iMac optical drive. Please watch the installation video guide before purchasing.

iMac to SSD SATA 6Gb/s cable, iMac SSD power cable, 2 suction cups for the outer glass removal, thermal safe adhesive mounting set, OWC Microfiber Pro Cleaning Cloth, and tools

Highlights

• Add a 3G or 6G Solid State Drive (sold separately) to your hard drive-only equipped iMac.
• Experience faster booting
• Near-instant application launches
• Data transfer speeds up to 559MB/s!

What is in the box:

• (1) iMac to SSD SATA 6Gb/s cable
• (1) iMac to SSD power cable
• (1) Suction cups for the outer glass removal
• (1) Thermal-safe adhesive mounting set
• (1) OWC Torx T10 Driver
• (1) OWC Torx T6 Driver
• (1) Phillips #2 Driver
• (1) Nylon Pry Tool
• (1) OWC Microfiber Pro Cleaning Cloth

NOTE This kit contains consumable and/or one-time-use components and therefore is not covered by any warranty. If you have any concerns about your ability to perform the upgrade, you can return the unopened kit for a refund. The 14-Piece Toolkit (except for the nylon pry tool and Microfiber Pro cleaning cloth) included with this kit is covered by a 1-Year NewerTech Product Limited Warranty.